BEC Technologies BEC7300

---

Configuration:

Logging In

Type the Default Gateway into your URL bar.
Default Gateway: 192.168.1.254

Enter username and password:
If the settings are default the username is admin and the password is admin

You should see the configuration screen:

You have now successfully logged into the BEC Gateway.

Wireless Configuration

Expand LAN, select Wireless:

Here you can configure your options. WLAN should be enabled. Make sure there are no spaces/special characters in your SSID. The mode should be on G or B and G. Hide SSID should be disabled. Channel should be between 1 and 11, preferrably not 6. Click Apply.

Next click on Wireless Security.

You can use WEP 64, WEP 128, WPA TKIP, or WPA AES. WPA2 is not supported.

DMZ/Intrusion Detection

Click On Virtual Server, at the bottom of your screen you should now see DMZ

Enable it, enter the IP address of the device you wish to put into the DMZ
For help understanding DMZ click here
Then click Apply

Also there is an Intrusion Detection feature located somewhere in this gateway:

This may cause issues and may need to be disabled

---

Back To DSL Modem Emulators

---