Speedstream 5000 Series

Speedstream 5100, 5200, 5400, and 5500 series modems

---

If the DSL modem is causing a problem, the easiest way to correct it is by bridging the modem.
A router is required, and the customer should call their ISP to have this done.
If the customer does not have a router, you can try to configure the modem:

Logging In

Type the Default Gateway (192.168.254.254 or http://speedstream) into your URL bar.

The first page you see should resemble this:

If not, click the Log In button on the left.
Enter the username and password as requested.
(default=admin)

Firewall/DMZ/ADS

Locate the Firewall settings, possibly under a heading of Firewall or Security.
Click on Firewall Level:

The Firewall Level should be set to Off. If it is not, select Off, then click Apply.

Afterwards click on DMZ.
This will bring you to the DMZ page:

Click on Enable DMZ with this Host IP address, and enter the IP address you wish to put into DMZ.
For help setting up a static IP on the SkyAngel box click here.
(You may be able to select it from the drop down menu from the other Enable DMZ selection)
Then select Make Settings Permanent, and click Apply

Locate Attack Detection:
You should be able to disable Attack Detection by verifying Enable Attack Detection is unchecked.

Then Click Apply

---

Back To DSL Modem Emulators

---