S-Video Setup

The first step is to connect the S-Video cable into the S-Video port on the SkyAngel.
The port is keyed so you will have to make sure the cable is turned the correct way before it can be inserted.
You will also need to attach the audio cables (Red and White) because the S-Video cable only carries video signal.
SVideoSTB


The next step is to connect the S-Video cable and the audio cable(s) into your television.
The S-Video cable port is keyed so you will have to make sure the cable is turned the correct way before it can be inserted.
The audio cables are color coated, so the Red cable goes into the Red port and the White cable moves into the White port.

You do not need to connect the yellow composite cable if you are using the S-Video cable.
(If you only have one audio port on your tv, this is fine. Just match the color - either White or Red)
SVideoTV


The last step is to get your television onto the right input channel
Do this either by using the remote or a button on the television of one is available.
The input channel should say s-video, video 1, video 2, etc.


Back To Equipment


Unless otherwise stated, the content of this page is licensed under Creative Commons Attribution-ShareAlike 3.0 License